Slip Yokes
Filters: JOINT ANGLE = 22, | PART NUMBER | SERIES | SPLINE COUNT | SPLINE DIA. | C/L TO END | C/L TO WASHER | JOINT ANGLE | BOOT KIT | DUST CAP | NOTES | VEHICLE CLASS | BRAND |
|---|---|---|---|---|---|---|---|---|---|---|---|
6-3-1601X |
1710 | 10 | 2.500 | 11.000 | 3.250 | 22 | BP | HD | Spicer | ||
| N3R-3-9170KX |
3R | 16 | 1.375 | 7.375 | 1.360 | 22 | 0 | 280194 | Used to replace the 32 spline slip and stub on GM applications | LD | Neapco |
| 4-3-1241KX |
1550 | 16 | 1.750 | 6.875 | 1.375 | 22 | 0 | D4K | Slip yoke plug 4-68-143, Lube fitting 500168-2 | LD | Spicer |
| 4-3-1921KX |
1550 | 16 | 2.000 | 4.875 | 1.469 | 22 | 0 | 5-86-68 | Slip yoke plug 468-43, Lube fitting 500168-2 | LD | Spicer |
| 5-3-108KX |
1610 | 16 | 2.000 | 7.812 | 1.440 | 22 | 0 | 5-86-68 | Slip yoke plug 5-68-174, Lube fitting 500168-2, BP Style |
HD | Spicer |
| 5-3-368KX |
1610 | 16 | 2.000 | 8.875 | 1.440 | 22 | 0 | 5-86-68 | Slip yoke plug 5-68-174, Lube fitting 500168-2, BP Style |
HD | Spicer |
| 6-3-2631KX |
1710 | 16 | 2.500 | 8.844 | 1.719 | 22 | 0 | 6.3-86-18 | Slip yoke plug 6-68-74, Lube fitting 500168-2, BP style | HD | Spicer |
| 6-3-2671KX |
1710 | 16 | 2.500 | 9.594 | 1.719 | 22 | 0 | 6.3-86-18 | Slip yoke plug 6-68-74, Lube fitting 500168-2, BP style | HD | Spicer |
| 8-3-391KX |
1880 | 16 | 3.000 | 10.031 | 2.031 | 22 | 0 | 6.5-86-38 | Slip yoke plug 868-13, Lube fitting 500168-2, BP style | HD | Spicer |
| 8-3-411KX |
1880 | 16 | 3.000 | 11.656 | 2.469 | 22 | 0 | 6.5-86-38 | Slip yoke plug 8-68-13, Lube fitting 500168-2, BP style | HD | Spicer |
| P3R-3-9170KX |
3R | 16 | 1.375 | 7.375 | 1.360 | 22 | 0 | 280194 | Used to replace the 32 spline slip and stub on GM applications | LD | PTI |
| P4-3-1241KX |
1550 | 16 | 1.750 | 6.875 | 1.375 | 22 | 0 | INCLUDED | Yellow Rubber Seal, Threaded | LD | PTI |
| P6-3-2671KX |
1710 | 16 | 2.500 | 9.594 | 1.719 | 22 | 0 | BP style | HD | PTI | |
| 3R03-32 |
3R | 28/32 | 1.375 | 7.205 | 1.360 | 22 | 3R18-322 | 211121X | Originally has boot, Can use 211121X Dust cap but you Must drill a breather hole in welsh plug. | LD | AAM |
| N2-3-9165KX |
1310 | 31/32 | 1.375 | 7.375 | 1.360 | 22 | 0 | ND3A | Commonly used on GM front 4X4 shafts with long slip | LD | Neapco |
